952

Rivet Setting Tool and Anvil Disc Set

Product Description

952

Rivet Setting Tool and Anvil Disc Set

For fixing D Rings to backing board with 2 Part rivets

For efficiency, first set the anvil disc into a shallow hole in a piece of chipboard or similar.

Then, punch or drill the 3mm hole in board and insert domed top part of rivet through D Ring and board. Push longer bottom part up into rivet. Position board over anvil disc. Use setting tool with light hammer.

The domed head looks attractive with a matching D Ring and the tubular bottom part leaves a smooth finish on the back of the board.

When correctly installed, a two-part rivet should take up to 2kg, but always test.

Setting Tool is 59mm x 11mm dia. Anvil is 22mm diameter, 5mm thick. Made in UK.

See also:

953 Rivets 2 Part Nickel Plated

951 Hole Punch 3mm for board and MDF